What should be done to make a plant wall?

AUTHOR： DATE：2018/3/26 10:00:26 VISITS：

  First, sterilization and disinfection

  The plants in the plant wall need to undergo a process from the base where they grow and the environment of the potted plants to the plant wall environment in the three-dimensional space. In this process, the plants are changed due to transplanting or the environment, especially the organic combination of different varieties of plants. Together, disinfection and sterilization are particularly important. Especially for the disinfection and sterilization of plant roots and leaves, there will be some dust and bacteria in the implementation of the plant wall project, and the roots and leaves of the plants will also be partially damaged. Therefore, at the beginning of the construction of the plant wall, the plant wall needs to be constructed. The overall disinfection and disinfection of the system from the root system to the blades facilitates better healing and adaptation of the plants.

  Second, the lighting control

  At the beginning of the construction of the plant wall, the photosynthesis of plants on the plant wall through reasonable lighting is carried out as soon as possible, and the relevant physiological metabolism is the guarantee of the survival rate of plant wall plants.

  In the outdoor plant wall system, if possible, the plant should be controlled so as not to be exposed to sunlight, so as to avoid dehydration. In the indoor plant wall, it is possible to allow the plants to accumulate energy in the early stage of the plant wall accumulation and to slow down the seedlings by lengthening the illumination time of the plant wall.

  Third, the deployment of water

  The amount of water needed to be established in the early stage of the plant wall, especially the first two to three times of irrigation should be changed as much as possible between wet and dry. Each stage of irrigation should ensure the saturation of the plant wall matrix. The saturation of the initial watering is very important, and it can be supplemented by watering. The saturation of the matrix of the plant wall was achieved, and the frequency of the second and third irrigation was used to guide the automatic control of the spacing and timing of the future plant wall.